Topics

1

G-Code, CAD, and CAM discussions / pockets cuts undersized when cutting but contours are accurate

« on: August 08, 2019, 03:37:35 AM »

  hello guys,

when I'm cutting pockets the pocket get 0.5mm less, there is nothing wrong with the CNC cause when cutting contours it gets cut accurately.

please check the files below

Thank You!

2

G-Code, CAD, and CAM discussions / 0.5mm off in cuts and pockets are creating slopes at one side

« on: May 11, 2019, 04:59:41 AM »

hello, I'm using mach 3 breakout board with TB6600 stepper controllers and i use fusion 360 to build my models

all the cuts i make they are losing 0.5mm like if i cut a 15x15mm square it will be 14.5x14.5mm and if i make a pocket it is creating a weird slope at one side
check in the attachments and same way losing 0.5mm

i have pretty much checked everything on the machine and software but cannot fix this issue