Guest
Show Posts
1
General Mach Discussion / "Goto Zero" getting Soft Limits Error
« on: May 10, 2018, 08:43:35 PM »
Hello Everyone! Smiley This is my first post. Hate to be so short, but I'm in the middle of a Project and the issue I'm having has brought me to a Halt!
Problem: I can manually move the spindle to an area with the "Soft Limits" ON with no problems! However, as soon as I press the "Goto Zero" button the spindle will head to that area and when it gets close the machine will stop! Mach 3 will give me a "Soft Limits exceeded" error. I can then still manually move the spindle past that area once again no problem. There are NO Limit Switches of any kind on this machine!
Hopefully Someone out there has had this issue before! All Help is Greatly Appreciated! Thank You Smiley
Problem: I can manually move the spindle to an area with the "Soft Limits" ON with no problems! However, as soon as I press the "Goto Zero" button the spindle will head to that area and when it gets close the machine will stop! Mach 3 will give me a "Soft Limits exceeded" error. I can then still manually move the spindle past that area once again no problem. There are NO Limit Switches of any kind on this machine!
Hopefully Someone out there has had this issue before! All Help is Greatly Appreciated! Thank You Smiley