Guest
Show Posts
1
PoKeys / Mach4 stopped recognising my lathe
« on: March 30, 2017, 10:24:01 PM »
Hey guys, I recently acquired a nice pokey mini lathe and managed to get the x and z axes moving in mach4 and the spindle SRO reading but realised I hadn't plugged the spindle power into the controller. Once I did this however mach4 stopped detecting my lathe on the profile I had.
I've tried replacing the profile from a backup, rebooted numerous times and reinstalled mach4 to no effect. Creating a new profile and using the wizard to add the lathe seems to detect the device but mach4 crashes before the wizard finishes every time I attempt this.
Any ideas what might be going on here?
I've tried replacing the profile from a backup, rebooted numerous times and reinstalled mach4 to no effect. Creating a new profile and using the wizard to add the lathe seems to detect the device but mach4 crashes before the wizard finishes every time I attempt this.
Any ideas what might be going on here?