1
General Mach Discussion / Configuring Z access
« on: February 08, 2016, 12:40:20 PM »
I'm in the process of setting up my machine for the first time and decided to start with Road Runner example that came with Mach3. I positioned the X and Y axis for home in the lower left-hand portion of my wood. Raised my z-axis just above my wood. When I press the go to Z button it reposition itself to the home position. I load the G code for the Road Runner and press the cycle start. The Z-axis raises itself up begins moving never touches the wood. Not really sure why the z-axis is raised