Hello Guest it is December 01, 2022, 11:04:32 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - KatzYaakov

Pages: 1 2 3 4 5 6 7 8
Mach4 General Discussion / set machine axess position 5 axiss+
« on: October 20, 2022, 07:53:20 PM »
we use abs encoder
we have other application that connect by RS485 chain to all drivers and inverter ,and read the ABS position
the only way we found can change mach machine position was by set homing as " home in place"
and change the offset value by external script(API) then when run homing its update the position
this have some problems ,but min time we find solution all
but still have one big issiue
when we have large axiss (6 axiss ,but there not all work paralel ,one is lath ,one is spindle hood...)
and when we run program  but in program move only with 3 or 4 axiss
one of the other extra axiss have small movement(something like 0.5mm each start block)
this small movement  are not noise ,the movement are comad from mach can see on screen
and main problem after several working the machine stack in soft limit because that axiss
****when we change back homing to normal this problem go


Mach4 General Discussion / upgrade to win 11 start problem
« on: April 27, 2022, 08:09:51 AM »
my customer upgrade to win 11( i don't know why but i believe it was that popups that bother the mind)
from that day we have big problem with loose position in mach
without any notice all machine coordinate become 0
its not happened many ,but its can happened after finish homing
 when start program
is some one matt such?
maybe its new update of microsoft fire wall?
or Mcafee?

Mach4 General Discussion / Best way work with Modbus
« on: February 04, 2022, 12:55:44 AM »
i have question about the way work with modbus
i can each  time i want data or send data open the com send then close the com
second way is establish the com then not close it until close much
first option have advantage that less problems with com fail and save computer time
but second option give me the advantage of listen of avent like error..
what do you think?

i use Api from c# to load gcode ,generate and run
i try so many options but not find any way to know when each command finish its cycle and i can go next step
itry with get the error value( that was mach support ide) but its not help ,i got "0" mean all ok but its nothing
i try by read the par value for example 4113 that give M function ,but when i make loop to cheack this value ,the cycle in  mach stop
so ...only have its option to put deley ,but this give us many deley while start up program for nothing
any help?
***is steve still on this forum? some one know?

Mach4 General Discussion / is the variable list have been changed?
« on: January 03, 2022, 12:51:13 AM »
i found now after h of test that curren tool pound var  move from
2029  to 1229
is there is new list?
please some one from mach ,its very hard without steeve help here

Mach4 General Discussion / why curent tool not work?
« on: January 03, 2022, 12:25:00 AM »
i had use long time the function:
int debug1 = mcCntlGetPoundVar(0, 2029, ref CurentToold);//2029
but its now on last version reply 0 not curent tool

Mach4 General Discussion / mach not release the file
« on: December 02, 2021, 07:58:58 PM »
i use mach with Tool changer for several machines 3 years
never had this problem before
M6 read the text file about tools magazine
but even that after i make M6 with mach i cant any more open the text file by notepad until i turn off mach
--i use last beta version of mach

Mach4 General Discussion / G4 P10 not work always
« on: October 06, 2021, 04:00:00 PM »
i use a lot the command G4 P... for delay and be sure in some point machine not "round" corners
but i have several time its not work
when mach arrive this line its just hold ,do nothing no any error message
 this sample its not working ,mach hold witout error:
G1 Y506.0852 Z15.1 F4000
G1 Y505.7232 Z15.4 F4000
G1 Y505.3649 Z15.8 F4000
G1 Y505.0102 Z16.2 F4000
G1 Y504.6593 Z16.5 F4000
 G4 P10
G0 Z56.5

and this sample its work:
G1 X1545. F8000
G1 Y1202. F8000
G1 X772.5 F8000
G4 P10
G53 Z0.

any idea?

Mach4 General Discussion / c axiss move while z axiss comand
« on: October 03, 2021, 02:29:59 PM »
pleaase if some ne matt such streng proble
i have machine with 6 axiss( not sioltanic)
but with c and z there very strenge beheviour
if i move by jog all ok
but if i move by comand the z axiss
c also move and even give me alarm over soft max
what can be?
this 2 axiss are not master slave not any conection

Mach4 General Discussion / Jerk ,S curve
« on: September 22, 2021, 06:34:54 PM »
hello every one
i use mach 4 for about 3 years more then 20 cnc
i always had acceleration problems ,but i always blame the chines structure
until we open our work shop and start produce our cnc ,but ...same problem cant get normal value for the acceleration without having vibration
 today we found the at least the reason
mach don't support S curve
i know this the reason because when we use the driver filter(its act similar as S curve)this vibration go even with high level of acceleration
after this long story i ask mach engineer ,please try put attention for this
its very very important(solve it by the driver its not correct way)please try solve this point

Pages: 1 2 3 4 5 6 7 8