1
General Mach Discussion / Sqauring the Axis
« on: August 30, 2015, 11:22:28 PM »
Would anyone be able to help me with a small problem i have..
The problem is that both the x and y axis need to be compensated for to make them true and sqaure against a straight edge..
Meaning that when the X Axis travel from the home position for example.. without touching any other axis the X Axis with shift
slightly sideways over a given distance. This is rather undesirable.
Could a knowledgable person tell me how to adjust the software so that it can compensate for this?
Hope i have made myself clear.. i couldnt find anything about this problem through searching through the forum
Cheers
The problem is that both the x and y axis need to be compensated for to make them true and sqaure against a straight edge..
Meaning that when the X Axis travel from the home position for example.. without touching any other axis the X Axis with shift
slightly sideways over a given distance. This is rather undesirable.
Could a knowledgable person tell me how to adjust the software so that it can compensate for this?
Hope i have made myself clear.. i couldnt find anything about this problem through searching through the forum
Cheers