Topics

1

CS-Lab / e-stop circuit IP/A

« on: February 10, 2016, 08:41:27 PM »

could someone look over the e-stop circuit (delta wire) to see if its right or i missed something,
or a better way.
the manual . [urlhttp://www.delta.com.tw/product/em/motion/motion_servo/download/manual/DELTA_ASDA-B2_M_EN_20130906.pdf][/url]
the other image. CSMIO-IP-A  is the schematic that cs-labs sent me for wiring for the delta drives.
that i'm adding the e-stop circuit

2

CS-Lab / Ac servo

« on: January 07, 2016, 08:14:44 AM »

Thinking about upgrading to ac servo and drives.
Was looking at delta in the 750w range for the BP.clone
Anyone have any experience with the delta drives and ip/a.

3

CS-Lab / Hitachi vfd

« on: December 25, 2015, 11:58:55 AM »

Need some help with the settings in the vfd.
It is a Hitachi wj200. With csmio ip-a.
Can't get to turn on the spindle motor.
Think it's a setting in the vfd or in mach can't seem to find it.
Thanks and marry Christmas to all

4

CS-Lab / CSMIO/IP diagnostic window

« on: March 31, 2015, 05:33:44 PM »

on the CSMIO/IP diagnostic window at the supply voltage -24 it says 119.85v in the display.
have check the supply voltage with a meter and getting just over 24 volts. anybody have any ideas why?
the 5 volt is fine and the cpu temp is at 37C which seems a little warm but really don't know

5

CS-Lab / Cs-lab ordering

« on: December 27, 2014, 01:10:25 PM »

Hi all getting ready to place an order with
Cs-lab, and have a couple questions for
Those have ordered and shipped to the USA.
How do they ship, ups, mail, ect....
Any import taxes?
Generally any problems ect...
Thanks

6

CS-Lab / Csmio/IP-A drives

« on: December 10, 2014, 04:08:48 AM »

Ok guys getting ready to dive into my first cnc build.
The machine is a supermax ycm 30. With a old dynapath system 10. Servo are good but 1 of the drives are bad.
So to use ip/a I know I need the drives to be analog. That's were the problem starts I'm Having trouble finding drives for my motors. And will work with the ip/a.
Motor are Baldor. With encoders
100vdc.(but 1 says 150 max v) it was a replacement
Motor. The Baldor site says 100 vdc)
Current cont. 6.13
Peak current 24.7
Anyone have known of drives that will work?
Thanks