Topics

1

G-Code, CAD, and CAM discussions / INVENTOR 2015 CAM - MACH3

« on: April 26, 2015, 04:48:38 PM »

What are your findings INVENTOR CAM and its use in MACH3

And what do you use postprocessor

thanks in advance,

2

Machscreen Screen Designer / Screenset metal bending machine

« on: April 02, 2015, 03:40:49 PM »

Is there somewhere a screenset for a metal sheet bending machine Mach3?

3

CS-Lab / OLD SERVOMOTOR REUSE IN MACH3

« on: March 22, 2015, 05:00:20 PM »

I would like to wish to retain my old servomotors during retrofitting my heavy mazak machines.Mazak VQB 20/50 AND MAZAK SLANT TURN 40 1500 ETC.

these actuators operate with a tachometer and resolver had thought this an appropriate (modern) encoder and driver to find, so they can be controlled by eg a lab CSMIO cs / IP module A
link http://www.cs-lab.eu/en/produkt-7,2-CSMIOIPA_Ethernet_Motion_Controller__10V_6_axis_with_connectors.html

the servo would between 1.2 - 2 Kw are ...

will post some pictures of the available materials, from Mazak you should know that there is to gather enough information ... I have no wiring diagram or other data vd servomotors

like your help
thx

4

CS-Lab / incremental encoder 10.000 RPM

« on: January 08, 2015, 07:03:22 AM »

Hello,


I can buy a second Schaublin 102 CNC lathe.

the rotational speed of the spindle is a maximum of 10.000 RPM

Can this with your incremental encoder - differential signal, TTL 5V :: 2500 p / rev :: IHU4808 and CSMIO ENC-threading module CS LAB?

Whether I use a proxy, or a Hall sensor with the I / O card CS Lab or a POKEYS57?

Thanks for thinking along

5

CS-Lab / Mach3 + CS LAB Ethernet 32 or 64 Bit??

« on: January 05, 2015, 03:12:43 PM »

Mach3 writes for 32 Bit with parallel port

But> Mach3 + CS LAB Ethernet with PC windows7 >> 32 or 64 bit ??
Can Mach3 than perfect work on 64 Bit?

6

Modbus / MODBUS PLC BECKHOFF CX 8090 / MACH3

« on: January 04, 2015, 06:31:02 AM »

I'm an EMCO TURN 140 to retrofitting, and to control the 8-part toolchanger I bought a PLC BECKHOFF CX 8090. with software TWINCAT 2

I am not able to put on the MODBUS igv parameters.

Does anyone have experience with that?

7

CS-Lab / 3 X SEPARATE MPG

« on: December 16, 2014, 05:22:04 PM »

it is possible with a CS Lab board to be used 3 separate MPG? Does anyone have a MPG WIRING?
THX

8

CS-Lab / thread milling on the mill

« on: December 16, 2014, 04:58:21 PM »

it is possible thread milling on the mill with cs lab and Mach3?

as in the link?  https://www.youtube.com/watch?v=fm9L6uUkaFk&index=1&list=PLiy1Rbu2OLATkn71N0x1jPkUz6zLC3dnA
grtz

9

FAQs / electrical diagram of the turret (Sauter)

« on: December 15, 2014, 09:37:07 AM »

I'm looking for the electrical diagram of the turret (Sauter) of an EMCO TURN 140 lathe?
To close it in MACH3 with CS LAB Board
Thank you to help me.


Kind regards

10

CS-Lab / TURRET SAUTER connect to CS LAB

« on: December 15, 2014, 09:25:59 AM »

does anyone know how i put my tool changer EMCO TURN 140 (Sauter) can connect to CS LAB?

OR has anyone an electrical diagram of the turret

Thanks in advance

FredMazak