Guest
Show Posts
1
General Mach Discussion / Initial startup problem
« on: October 20, 2014, 06:17:26 PM »
Hi, I quite new to Mach3 and I have a problem when starting my milling.
After I have refed all the axis, the tool is in the material (Z0). When I start the milling program, the tool moves in X/Y direction first to the starting point after that the Z axis is moved up and then down to start the actual milling. I would like the tool to move up first to safe pos, then moxe X/Y axis.
Now I get som nice scratches on the topface of the material.
Br
Stefan
After I have refed all the axis, the tool is in the material (Z0). When I start the milling program, the tool moves in X/Y direction first to the starting point after that the Z axis is moved up and then down to start the actual milling. I would like the tool to move up first to safe pos, then moxe X/Y axis.
Now I get som nice scratches on the topface of the material.
Br
Stefan