Guest
Show Posts
1
General Mach Discussion / Reset button clears machine coordinates
« on: September 03, 2014, 02:13:08 PM »
For some reason the machine machine coordinates is set to zero when I press the "reset" button.
Steps:
Press "ref all home" button and wait for homing to complete.
Load a G-code program and run some lines. The machine moves away from zero position.
Pressing the "reset" button then set machine coordinates to zero
If I restart the program the work position is moved the distance to where I pressed reset
Is there anyone there has an idea what is happening?
I assume I can use the reset button to stop a program if I want to change something.
System:
mach3 ver: 3.043.066
CSMIO/IP-M controller
Best regards Uffe
Steps:
Press "ref all home" button and wait for homing to complete.
Load a G-code program and run some lines. The machine moves away from zero position.
Pressing the "reset" button then set machine coordinates to zero
If I restart the program the work position is moved the distance to where I pressed reset
Is there anyone there has an idea what is happening?
I assume I can use the reset button to stop a program if I want to change something.
System:
mach3 ver: 3.043.066
CSMIO/IP-M controller
Best regards Uffe