Guest
Show Posts
1
General Mach Discussion / Radius to end of arc differs from-
« on: July 19, 2018, 01:51:42 PM »
I have used my home built CNC router for some time now free of any major problems or errors. However yesterday I was running a project that I created in Fusion 360, and when I loaded the G-code into my Mach3 software. I received an error informing me that the Radius to end of arc differs from- not able to read the remainder.
After repeatedly running the G-code of a simple circle and coming up with the same error, I now ran the model and g-Code through Cam Bam and yet I received the very same error. Am I correct assuming that the problem is in Mach 3 and if so any ideas on how to repair the problem.
Thank You for any help anyone can provide.
Jim
After repeatedly running the G-code of a simple circle and coming up with the same error, I now ran the model and g-Code through Cam Bam and yet I received the very same error. Am I correct assuming that the problem is in Mach 3 and if so any ideas on how to repair the problem.
Thank You for any help anyone can provide.
Jim