1
General Mach Discussion / DRO doesnt match gcode move
« on: February 23, 2014, 06:19:47 PM »
I input as follows
go
x -1.000
y -1.000
z -1.000
And the Dro reads
x -0.9984
y -0.9970
z -0.9997
is there some way to correct for this?
go
x -1.000
y -1.000
z -1.000
And the Dro reads
x -0.9984
y -0.9970
z -0.9997
is there some way to correct for this?