1
General Mach Discussion / Chinese 6040 setup in Mach3
« on: November 15, 2013, 01:12:55 AM »
Hoping someone can help me. Trying to setup my 6040 cnc. Instructions that came with the system for mach3 setup are as follows
Steps per on all AXis 640
Velocity X&Y 2500
Velocity z 800
Acceleration X&Y 200
Acceleration Z 150
Step Pulse 5
Dir Pulse 1
This caused jobs to miss many steps doubled the job size and was generally Crap.
Changed steps to 320 x 2000 x 200 XY
This eliminated most problems.
Jobs are now correct size. Although job is perfect for approx first 50% after that Z axis seems to start going deeper. Cchecked that tool was properly tightened and work flat)
Job im doing is the Bullshead sign from vectric.
Any help greatly appreciated
Steps per on all AXis 640
Velocity X&Y 2500
Velocity z 800
Acceleration X&Y 200
Acceleration Z 150
Step Pulse 5
Dir Pulse 1
This caused jobs to miss many steps doubled the job size and was generally Crap.
Changed steps to 320 x 2000 x 200 XY
This eliminated most problems.
Jobs are now correct size. Although job is perfect for approx first 50% after that Z axis seems to start going deeper. Cchecked that tool was properly tightened and work flat)
Job im doing is the Bullshead sign from vectric.
Any help greatly appreciated