Topics

1

General Mach Discussion / Mach 4 Question

« on: April 03, 2014, 10:34:09 AM »

Will mach 4 be able to use Encoders  for closed- loop operation
Thanks Robin

2

VB and the development of wizards / need help with macro

« on: July 11, 2013, 10:28:30 AM »

I have been a cnc tech for years and
all inputs and outputs work and have been tested
   my biggest problem is that i am familiar with latter logic and programing of other plcs which is probably a hindrance (aerotech Mitsubishi  Automation-direct)
what i want to do is to create something so when i
activate a M-code or ?
i can run a program to look at a input( input#2 )
then activate a air cylinder( output#5 ) then
once the air cyl is forward see the next input
( input#1 ) and shut off the output

M22.m1s

Do
If Not (getoemled(821))Then
End If
If (getoemled(821)) Then activatesignal(output5)
Loop
Do
If Not (getoemled(822))Then
End If
If (getoemled(822)) Then deactivatesignal(output5)
Loop
Do
If Not (getoemled(821))Then
End If
If (getoemled(821)) Then Exit Do
Loop

Thanks Robin