Topics

1

G-Code, CAD, and CAM discussions / Emachine shop drawing to D2nc cam to Mach3

« on: October 29, 2015, 02:29:13 PM »

Hi to all, I'm new to all 3 of these programs and I don't have much hair left to pull out so I hope someone can help me figure out the process to download a drawing from E machine  to D2nc and then to mach3.
Thanks a heap for any help, Jerry

2

General Mach Discussion / setting up the surfacing wizard

« on: September 22, 2014, 09:28:37 PM »

Hi I'm new to the mach3  and the wizards. the problem I'm having is when I input the clearance of .100 and final depth of .01 and depth of step at .001 the code says that it takes 2 passes at .005 rather than 1 pass at .01 what am I missing?