1
Feature Requests / named variables
« on: February 26, 2013, 06:40:43 AM »
EMC2 can work with named variables
e.g.:
#<_xoffset> = -0.28000
instead of
#100 = -0.28000
This was already mentioned here:
http://www.machsupport.com/forum/index.php/topic,18453.msg127162.html#msg127162
but doesn't seem to have a topic in feature-requests yet.
This for example completely prevents me from using the etch_z_adjust script for prototype PCB milling.
(adjusts the PCB2Gcode output to run a 10x10mm grid of Z-probes to determine the actual z location of a not perfectly even PCB suface)
e.g.:
#<_xoffset> = -0.28000
instead of
#100 = -0.28000
This was already mentioned here:
http://www.machsupport.com/forum/index.php/topic,18453.msg127162.html#msg127162
but doesn't seem to have a topic in feature-requests yet.
This for example completely prevents me from using the etch_z_adjust script for prototype PCB milling.
(adjusts the PCB2Gcode output to run a 10x10mm grid of Z-probes to determine the actual z location of a not perfectly even PCB suface)