Topics

1

General Mach Discussion / New to Forum

« on: October 06, 2016, 10:00:10 AM »

I've been using Mach for about 15 years, but new to the group.

I've come here hoping someone could talk me thru a new machine setup. This is a rather long story and I don't want to get into it to deep.

I decided to start from scratch setting up a lathe using Mach3. I downloaded the latest and greatest version and went to work. My machine will move in X&Z, but will not home and spindle will not start. I'm using an XP, lathe is EMCO PC50, I copied the Mach3 Turn and am using this, switched to Diameter mode and loaded data to ports and pins, motor tuning, Gen. Confg. and home info.

There is a lot more to this story, but this is a start.

Thanks for your help

OP

2

General Mach Discussion / download problems

« on: March 09, 2014, 01:26:05 PM »

I have a licensed version of Mach3 on my small bench top mill. I am now setting up a lathe and I wanted to see what Mach3 could do for me with a lathe. Problem being it won't work, I try to start it and get a white blank screen. I have tried to down load new versions with no luck. I also tried uninstalling and reinstall and nothing.

3

General Mach Discussion / Emco 50 Lathe & Mill

« on: November 10, 2012, 12:29:25 PM »

Hi,
I've used Mach3 for over a year now in a retrofitted grizzly mini mill. I am new to this group and I'm looking for advice. I was just given two CNC's, Emco 50 Lathe and Mill but it appears that the PC's and software have been lost. It was my intention to get these running and offer the use of them at my son's school so I don't want to sink a lot of money into them. Contacted Emco, the worst case price is about $3500 to retrofit each machine and there is no guarantee that more repairs might be needed. My experience level is die making / machinist for 35 years, did some CAD/CAM programming for friends for the past 10 years. My electrical experience is lacking so this project may be out of my reach.....

My questions are if anyone has retrofitted these types of machines and what type of success they had?  What my projected costs may be?

Any comments or questions or suggestions are welcome.....Thank You
older_pup