Guest
Show Posts
1
General Mach Discussion / "Y" YESTERDAY - NO "Y" TODAY
« on: August 20, 2012, 01:36:19 AM »
EZROUTER PLASMA TABLE RUNNING MACH 3.
Could both motors go out at the same time, or is it something simple. I have the machine for 2 year and now that my backlog is the biggest its ever been, I am dead in the water. HELP.
Noticed the gantry needed cleaning so I wiped it down and oiled tracks. Manually moved gantry forward and backward easily and slowly, and now nothing. On the Mach 3 screen it shows it should be moving but it is not.
Any ideas?
Buzz
Could both motors go out at the same time, or is it something simple. I have the machine for 2 year and now that my backlog is the biggest its ever been, I am dead in the water. HELP.
Noticed the gantry needed cleaning so I wiped it down and oiled tracks. Manually moved gantry forward and backward easily and slowly, and now nothing. On the Mach 3 screen it shows it should be moving but it is not.
Any ideas?
Buzz