1
General Mach Discussion / Z switch Z home yhome led?
« on: July 15, 2012, 06:21:58 PM »
Ok Hello all. I am having a problem with my z axis on a plasma table . When I ZHome the zaxis drops down triggers the Z home switch but It does not reverse back up to disengage the switch. Another thing in my DTHC manual from candcnc it says the Y led should be lite when the Z switch is triggered. About page 28 MP3000. Well my Z LED Lights up when the Z switch is triggered. The other way doesn't make sense to me. Anyway I'm using sheetcam with MACH3. I'm have got a lot of things working but many little things keeps setting me back. I'm have a hard time understanding which settings really control my torch height. Sheetcams or Mach3. Seems the learning curve is more like a circle...Not sure if I should ask MACH3 Sheetcam or CANDCNC these questions? Or just pull the torch off and do some dismantling. LOL Thanks for any input, I feel like Im sooo close to it making sense