Guest
Show Posts
1
Show"N"Tell ( Your Machines) / Boxford TCL125 - retrofitted
« on: August 20, 2011, 02:06:07 PM »
Hi all,
I purchased this loverly little Boxford 125 from a good friend that no longer had any time for it
So far i have replaced just about every part except the steppers and the Gemini board!
This is how she looks now.
At the moment im using Mach3 to control the x/z axis but not the spindle.
im using Gecko 201's with CNC4PC board
Im at the point now where i want to start testing the capability more but im getting stuck on the orientation part as its a
slantbed and when i run a program it seems to be doing wierd things
I did this but manually moving the X/Z Axis with the keyboard
I will keep looking through the forum to see if anybody has had the same machine or simular and what there configs were
Stu
I purchased this loverly little Boxford 125 from a good friend that no longer had any time for it
So far i have replaced just about every part except the steppers and the Gemini board!
This is how she looks now.
At the moment im using Mach3 to control the x/z axis but not the spindle.
im using Gecko 201's with CNC4PC board
Im at the point now where i want to start testing the capability more but im getting stuck on the orientation part as its a
slantbed and when i run a program it seems to be doing wierd things
I did this but manually moving the X/Z Axis with the keyboard
I will keep looking through the forum to see if anybody has had the same machine or simular and what there configs were
Stu