Topics

1

Galil / mach3/galil

« on: October 17, 2007, 02:20:45 PM »

mach3 v 2.48, galil dmc1760, galil ICM2900

In order that I can decide that, yes, I can start to wire in this new system, I am running some simple tests before I fully commit.

I configured mach 3 v2.48 to use port 1, and assigned pin 3 for coolant.
From galil's smart term, I can turn out3 on and off.
from mach3, when I toggle the flood coolant button,  out3 turns on, but not off.

this has not yet been registered, is it contributing to my trouble?
is there something else I might be missing?

if anyone is fluent in mach3/galil? I will gladly compensate someone for live tech support that is.

thanks

Jon  724-228-2133

2

Mach3 and G-Rex / network setup, and how to run G100.m3p file

« on: October 11, 2007, 05:37:59 PM »

setting up a g100 under mach 3....

in setting up the network, I assigned 192.168.1.100 to the pc.
when I ping 192.168.1.10 , I get the message request timed out.
the setup guide  indicates this to be a cabling problem, but I am using a brand new network crossover cable bought from staples, connects the pc directly to the g100.
comments?

also, when I try to run G100.m3p, winxp asks me what to open it with.
Huh? the setup guide makes no reference to this.