Guest
Show Posts
1
General Mach Discussion / Need help with ref all home
« on: July 20, 2011, 06:09:01 AM »
Morning all,
I just took up this bad habit about three months ago and I can't tell you how much fun it has been to get to this point. My machine is mostly completed, needs some paint. I have completed the setup procedures and I have one problem left to solve. My machine will not reff all home. My limit switches are working correctly and the "go to zero" functions fine. When I hit the ref all button, either the machine does not move at all, or one of the axis will move about .0001 and stop. I have gone to the diagnostics screen and attempted to home each axis individually and got the same response, the axis either does not move or subsequent pressing the home button, the axis moves a little tiny bit. I have the XYZ home enabled as per instructions. I have spent a couple of hours digging around and can't seem to get this fixed. Hoping someone can help.
Thanks,
Kevin
I just took up this bad habit about three months ago and I can't tell you how much fun it has been to get to this point. My machine is mostly completed, needs some paint. I have completed the setup procedures and I have one problem left to solve. My machine will not reff all home. My limit switches are working correctly and the "go to zero" functions fine. When I hit the ref all button, either the machine does not move at all, or one of the axis will move about .0001 and stop. I have gone to the diagnostics screen and attempted to home each axis individually and got the same response, the axis either does not move or subsequent pressing the home button, the axis moves a little tiny bit. I have the XYZ home enabled as per instructions. I have spent a couple of hours digging around and can't seem to get this fixed. Hoping someone can help.
Thanks,
Kevin