1
General Mach Discussion / mach3 mill Problem with G2/G3 and G18
« on: May 23, 2012, 04:58:52 PM »
Using the mill as a lathe with stock held in mill collet and tool in lathe.
G2 and G3 seem to be reversed. If I replace G2 with G3 and vise-versa, my part is made correctly. The toolpath display shows it incorrectly either way.
G2 and G3 seem to be reversed. If I replace G2 with G3 and vise-versa, my part is made correctly. The toolpath display shows it incorrectly either way.