Topics

1

Finished Screens / High Resolution All-In-One Screen for Plasma/Scribe MP3000 DTHC

« on: January 06, 2011, 07:33:31 PM »

This is a simple one-page screen set customized for those using the MP3000 UBOB from CandCNC Bladerunner system.  Screen Resolution is 1438 x 825.

The menu utilizes controls for the MP3000 with DTHC and a pneumatic scribe pen.  Two macro buttons on the tool-path window are left for custom commands.

Created by:
Voodoo Vintage Fabrication
Austin, Texas
http://www.voodoovintage.com

INSTRUCTIONS:

Copy the "voodoo" folder to your Mach3/Bitmaps directory.  Be sure to leave the PNG file in the "voodoo" folder.
Copy the voodoo.set file to your Mach3 root directory.
Enjoy!

2

Mach Screens / Mach3 input dialog box for Z-axis offset

« on: January 04, 2011, 04:07:19 PM »

On my plasma table, I set my Z-axis offset in HOMING/LIMITS.  Because the material I'm cutting flexes differently depending on the location of the table, I'm constantly having to reset my Z-axis offset by a couple hundredths...

Is there a dialog box in machscreen that I can use to type in my z-offset and send the amount to the HOMING/LIMITS settings?  Tool and fixture offsets seem to do no good...?

Thanks!