Hello Guest it is March 28, 2024, 09:08:44 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - petecul

Pages: 1
1
Show"N"Tell ( Your Machines) / cnc winding machine
« on: July 21, 2010, 12:56:52 PM »
Hi there,

I am new to this forum, want to share with others my cnc project, a small cnc winding machine that a would like to run on mach3.

http://picasaweb.google.ca/plduchesne/WindingMachineCnc?feat=directlink

Bought a stepper package on ebay and now having hard time to set it up on my laptop.

Stepper got 200 step per turn, can microstep to 1/4, 1/8 and 1/16.
The spindle turn 1/2 turn for 1 turn of stepper and sliding axis move 1mm for 1 turn of stepper

At the motor tuning step on mach 3, i am putting 200 steps for 1mm, (no microstepping) and putting 1000 mm/min. When I hit the arrow key, the motor rotate very very slowly. I cannot get the motor turning fast?? Anyone could help me  with this small issue? kernel speed is set at 35khz.

Would like too some help building g code programm that allow me to make coil. X axis is spindle, y axis is sliding axis at 1mm per turn.
Coil parameters are numbers of turns, distance  y axis need to travel for each turn (coil wire diameter) and number of layers. Y axis movement is  function of rotation speed (x axis).

Any help, suggestion will be more than appreciated.
Thanks in advance

petecul


Pages: 1