1
Galil / Galil + Mach issue with G moves
« on: April 28, 2010, 11:12:05 AM »
I have a Galil DMC 2183 that I am using to drive a couple of servos on a laser station. I have installed the latest version of Mach3 (3.042.040) and have the latest plug-in for Galil (4.4).
When I start Mach3, I have created a new profile and chosen my Galil controller when setting up the plug-in. I am able to jog the servos at this point and can input G0 X... moves and the motors move. When I exit Mach3 and reopen, I am able to jog, but I am no longer able to do the G moves. After trying the G moves, I can no longer jog the motors unless I perform a Reset.
I have tried this several times where I create a new profile, am able to have everything function properly and then lose the functionality once I restart Mach3.
Any help on this is greatly appreciated.
When I start Mach3, I have created a new profile and chosen my Galil controller when setting up the plug-in. I am able to jog the servos at this point and can input G0 X... moves and the motors move. When I exit Mach3 and reopen, I am able to jog, but I am no longer able to do the G moves. After trying the G moves, I can no longer jog the motors unless I perform a Reset.
I have tried this several times where I create a new profile, am able to have everything function properly and then lose the functionality once I restart Mach3.
Any help on this is greatly appreciated.