Topics

1

Show"N"Tell ( Your Machines) / My cnc machine

« on: November 17, 2008, 03:37:51 PM »

My cnc
I have run it for 7 months now an it working great.....no trouble at all.
So i am very glad....
Mach3 is working like a charm.



More pics and specs on my cnc site.
www.lcgl.se/cnc

Christer

2

Show"N"Tell ( Your Machines) / My MPG remote and macropump file

« on: March 30, 2007, 03:38:43 PM »

Hi all i have done my modio controlled pendant ready....it seems to work fine.
Now i have to build my second machine ready so i can use my new remote 

Some info about it

In program run mode ....single or auto
hold start button for 1 sec and program starts....(for safety reason)
hold stop button less than 1 sec pause the program
hold stop button more than 1 sec stops program
MPG is disable

Jog mode x-c axis
start button jog axis + with selected feedrate
stop button jog axis - with selected feedrate
if i turn feed knob to 150% then
start zero selecet axis and stop restore axis value (must hold down for 1 sec )
the mpg wheel has this values
if feedrate knob 0-6% then mpg is in stepmode 0.01mm 
if feedrate knob 10-30% then mpg is in stepmode 0.10mm 
if feedrate knob 40-100% then mpg is in Constant Velocity 

cw and ccw mode
hold start for 1 sec starts spindle with 150rpm then
every push on start button step up spindle with 50 rpm and
every push on stop button less than 1 sec step down spindle with 50 rpm
Hold stop for more than 1 sec stops spindle

Screen button
Toggles the To Go screen

And Estop
stops all i hope

Off = offline
mpg disable
Thats all

A little video on the pendant
www.lcgl.se/video/mympg.wmv

My macropump file