Topics

1

Bargain Basement / HiCON Integra Controller 7766

« on: September 27, 2021, 04:33:48 PM »

I have a brand new HiCON Integra Controller 7766 never used.  I bought it a few years ago to see if it was a viable option at the time but went with a different controller.  Has been sitting in a drawer.  300.00 plus shipping to US address.

2

Bargain Basement / KFlop

« on: March 27, 2021, 09:41:54 PM »

Selling KFlop (single board only).  Works perfect just no longer need. 

150.00 plus shipping to us address only.

3

Bargain Basement / 2500mw 450nm Laser Module with Protective Glasses

« on: June 12, 2020, 09:56:01 AM »

I bought it a while back thinking I would someday add it to a machine but it never happened. I had not planned on selling it but I just got a new engraver that has a connection for a laser but uses a 12v PWM signal and this module is a 5v TTL.

50.00 for all which includes shipping to US address.

4

Bargain Basement / SmoothStepper(usb)

« on: June 09, 2020, 08:11:34 PM »

Ok, I've gone through all my stuff and the last thing I have to sell is a Smoothstepper (USB).

80.00 (that includes shipping in the US)

5

Bargain Basement / CNC Router/Engraver Frame w/Motors

« on: June 05, 2020, 12:00:27 PM »

Used CNC router/engraving machine.  Rails are a little rusty from being stored for a little over a year but with a little cleaning will work very well.  Machine has 9" x 9" X/Y slide travel and a cantilevered Z with travel depth of 4". 

Even mounted on an MDF substrate machine was very accurate.

Price is firm due to heavy duty extrusion frame will cost a bit for me to ship.

** MDF substrate and rotary tool as seen in picture ARE NOT included.


225.00 (Price is firm since it does include shipping in the US)

6

Bargain Basement / cnc frame and controller

« on: June 04, 2020, 10:02:28 AM »

I have a used cnc frame (shapeoko original version) that has been sitting collecting dust for a while.  The frame has been extended to 23" x 23" I also have the original 15" rails and belt.  Included as well is a 4 axis controller (4 Axis TB6600HG Stepper Driver Board Controller) and 5 nema17 motors.  Picture shows a couple of acrylic plates that I tried out that were made on a laser but the original plates are included.

Everything is a little dirty but moves around perfectly.

price 150.00 plus shipping and paypal fees.

7

Bargain Basement / Dynomotion KFlop / KAnalog controllers

« on: September 09, 2019, 03:03:11 PM »

I have 2 of each.  They are used but work perfect, pulled from working systems.

2 each, KFlop, 175.00 each
2 each, KAnalog, 175.00 each

If you want to buy a KFlop/KAnalog combo price is 300.00 each.  Price does not include shipping or paypal fees.

8

Bargain Basement / XY linear stages

« on: September 02, 2018, 09:39:28 PM »

X/Y linear stage that was intended to use on a CNC machine which has only ran for a few hours.  Cannot sell and ship complete machine so I am parting it out. Could use a cleaning but work well and very smooth.

Dual high precision linear slide unit with ball screws and anti-backlash nuts.  Each slide has a 9" max travel. 2 Balluff proximity switches already mounted to the slide (24VDC) as well as 2 nema 23 stepper motors.

400.00 + 80.00 (to cover UPS ground and shipping supplies + paypal fees)

I posted a picture of the complete machine just to give an idea.

Thanks!

9

Bargain Basement / High speed spindle with controller unit

« on: September 02, 2018, 09:37:17 PM »

High speed spindle was intended to run on a custom CNC machine which has only ran for a few hours. Cannot sell and ship complete machine so I am parting it out.

NSK ASTRO-E 400 NE52 Control Unit With NSK EM-401 High Speed Spindle Motor.

Includes 3/16 collet and nut.
2,000~40,000 rpm
Stainless Steel Housing
13 ft. long power cord and air coolant hose

Excellent condition, has spent most of its life collecting dust.

500.00 + 80.00 (to cover UPS ground and shipping supplies + paypal fees)

I posted a picture of the complete machine just to give an idea.

Thanks!

10

Bargain Basement / 3 axis controller, custom build

« on: September 02, 2018, 09:31:32 PM »

Built controller box to run a custom CNC machine which has only ran for a few hours.  Cannot sell and ship complete machine so I am parting it out.

Enclose consists of the following:

110VAC power input
48VDC power supply (motor supply)
Additional 5/24VDC power supplies for home inputs and Dynomotion controller
Dynomotion KFlop/KAnalog controller
Gecko G203V Digital Step Drives x 3
Inputs for XYZ home proximity switches (24VDC)
Touch plate prewired
Dual relay outputs (configured for 110VAC loads, each with a 5 amp fuse)
External E-Stop
Four additional external buttons can configure/wire for run, pause, etc.

(Controller, Stepper drives and relay card are brand new)

500.00 + 80.00 (to cover UPS ground and shipping supplies + paypal fees)

Additional 100.00
Dell laptop running windows XP with Mach3 and Kmotion installed and configured to run above controller.  You will need to supply mach3 license.

I posted a picture of the complete machine just to give an idea.

Thanks!