Guest
Show Posts
1
General Mach Discussion / Asus a8v mb pci slot voltage
« on: July 29, 2013, 06:24:38 PM »
I've been using Asus a8v mb Mach 3 Gecko G540 for a few years now. I picked up a second G540, a Parallel port PCI card for a 4TH Axis.
Everything is set up But the second G540 will not kick on with the PCI card. If I use the first printer cable an put it on the second G540 it kicks on.
The PCI card is a Rosewill RC-302. I also tried another card StarTech PCI1_LP with no luck. If I turn off the charge pump on the new G540 it comes on
as soon as I hit the power button.Both Pci cards are 5volts I could use a little help. Thanks
Everything is set up But the second G540 will not kick on with the PCI card. If I use the first printer cable an put it on the second G540 it kicks on.
The PCI card is a Rosewill RC-302. I also tried another card StarTech PCI1_LP with no luck. If I turn off the charge pump on the new G540 it comes on
as soon as I hit the power button.Both Pci cards are 5volts I could use a little help. Thanks