1
FAQs / G81 canned drill routine too slow to position
« on: March 14, 2009, 12:15:38 PM »
I am trying to figure out how to change the feedrate to rapid position between holes in a 28 hole g81 routine. My code looks like this:
G81 x0 y0 z-0.9 ro.1 f5
x1.25
y0.75
x0
y1.5
and so on......
The feedrate f5 is great for drilling but way too slow when positioning.
G81 x0 y0 z-0.9 ro.1 f5
x1.25
y0.75
x0
y1.5
and so on......
The feedrate f5 is great for drilling but way too slow when positioning.