Hello Guest it is March 28, 2024, 12:00:09 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - gbravo

Pages: 1
1
General Mach Discussion / New computer problem
« on: October 22, 2012, 12:22:47 AM »
The computer of my CNC died and I replaced it with a Dell Optiplex GX270 Pentiun4 and Win XP, after connect the parallel port, my problems began. Unexpectedly, the engines stops, making sound. This occurs unexpectedly in any of the 4 axes and turning the system in very unstable.

The Test Driver tells me excellent control system, with max variations of 20 ms. I have also made ​​all the recommendations of "Win XP Optimization", without results. I also tested another PCI parallel card, change step pulse and dir pulse etc,etc,etc...

Any idea or solution recommendation.

Thanks,
German

2
General Mach Discussion / Probe plug in
« on: March 11, 2012, 01:47:44 AM »
Where I can download the Digitizing and Probing plug in?
Regars.
German


3
VB and the development of wizards / Picture in Dialog Box
« on: May 14, 2008, 07:44:52 PM »
How I can to include a  picture or icon in dialog box.?
I need to put some identification symbols within dialog box (like stop, question or exclamation used in Msgbox but with other picture).
Thanks,
German

4
VB and the development of wizards / ShuttlePro indication
« on: February 03, 2008, 09:48:39 PM »
Hi VB gurus,
Anybody have any idea how I can create a LED, UserLabel or any indication in the screens for show which axis is selected with ShuttlePro.
Thanks,
German

5
General Mach Discussion / Debounce value?
« on: November 05, 2007, 11:58:54 AM »
I was stability problems with my limit switches, but after reading many post about this topic, many people recommend to increase debounce interval, I change to 2000 this value, and my problem was solve.
Now my question is,
What is the effect of debounce interval in Mach3?
What happen if this value is too high?
Thanks,
German

Pages: 1