Topics

1

PoKeys / New ultimate CNC keyboard!!

« on: September 12, 2011, 12:57:20 PM »

New PoNET kbd48CNC keyboard will be avaiable after September 16th 2011.
http://www.poscope.com/product.php?pid=29
It is dustproof, watterproof, came with beautiful hard anodized aluminium frame = very simple montage, And it is connected with simple 5 pin cable to PoKeys56 E and U.
Brian made a plugin which is directly supportin these keyboard.

And last not least: It is based on Scott Schaffer idea, so thanks Scott for great idea!

2

PoKeys / New PoKeys56U was released!!

« on: September 12, 2011, 12:22:25 PM »

Hi!

New PoKeys56U was released recently. They are 100% replacement for PoKeys55. Mechanical dimensions are the same, all software which works on PK55, should work also on PK56U. New PK56U has more procesor speed and it is prepared for upcoming aditions.
http://www.poscope.com/product.php?pid=28
Here is also comparision between all PoKeys models: http://www.poscope.com/uploads/files/PoKeysComparison.pdf

3

PoKeys / new PoKeys upgrade avaiable

« on: May 07, 2011, 06:30:34 AM »

Just want to point you that new PoKeys upgrade is avaiable on www.poscope.com
Improved Modbus and other functions, added direction input for counters, improved documentation.

4

PoKeys / New PoKeys56E released (Ethernet, UDP, Modbus)

« on: March 08, 2011, 03:02:08 PM »

There is always something cooking in PoLabs development department and more than these is cooking

We are proud to present new PoKeys56E. Yes it is Ethernet (UDP and Modbus) and yes performances are improved again. Candies like reading I2C and 1 wire sensors, ultra fast encoder, ExtBus on aditional connector and more are added. http://www.poscope.com/product.php?pid=27

Software, user manual and protocol specs are updated for whole PoKeys family.

Plugin for Mach should follow, but you can use it also with Mach Modbus support directly.

regards

Boris

5

PoKeys / How to use PoPendant and PoKeys in Mach

« on: August 17, 2010, 05:14:12 PM »

Hi all!

Finaly I have got some time and writted manual with Scotts great help.
Link is here: http://www.poscope.com/product.php?pid=3
It is made with lot of pictures, so even kids and grandmother should understand it.
There is also configuration file for PoKeys.

regards

Boris

6

PoKeys / New beta plugin

« on: April 04, 2010, 06:58:15 AM »

Hi!

Just want to inform you that there it is new beta plugin avaiable on www.poscope.com
Please test it and comment here (good comments also allowed )

thanks and best regards

Boris

7

PoKeys / New PoKeys software

« on: April 05, 2009, 03:56:19 PM »

Hi to all!

New PoKeys software was iploaded to www.poscope.com.
New options/corrections:
- added up to 8x8matrix keyboard interface
- added up to 6 PWM outputs
- some bugs removed

best regards

Boris

8

Promote and discuss your product / PoKeys - Add 55 analog, digital inputs and outputs to your CNC

« on: June 19, 2008, 03:47:48 PM »

PoKeys is USB keyboard and joystick emulator with 55 user configurable analog and digital inputs or outputs. Inputs and outputs can be directly controled by users software. It works under all operating systems which supporting USB.

PoKeys is simple, easy-to-use USB device that combines standard keyboard and joystick simulation.
PoKeys enables user to design specially built robust computer interface, comprising only mechanical keys and PoKeys device. The device is highly adjustable and as such requires no complex knowledge on device programming.
If additional input and output capabilities are needed, the device provides 55 digital 5V tolerant inputs or outputs, 5  10-bit analog inputs and one 10-bit analog output. They are controlled via included software, which enables user either to use the highly intuitive graphical user interface or advanced console type interface. It can be controled also directly from your custom software. Chosen settings can be stored on device, so no special software is needed on target system.

PoKeys can be used as industrial or CNC control, custom joystick or keyboard or data acquisition board. It is avaiable with or without screw terminals to best suit customers application.

Many details, users comments, user manual and demo software are also on our web page: www.poscope.com. Units are on stock and is shipped the same day after order receiving.

Boris Zalokar
PoLabs