Hello Guest it is July 29, 2021, 11:45:03 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - KNS Supply

Pages: 1 2 »
General Mach Discussion / Can Mach 3 Mill put on a Kitamura Mycenter1?
« on: March 14, 2012, 11:58:58 PM »
Can Mach 3 Mill put on and used on a Kitamura Mycenter1 VMC?

I use it on my mill everyday that I built from a old Wells Index, but that's a home made machine.

The control on a machine does not work.

Please let me know.

General Mach Discussion / Wireless Xbox controller problem
« on: September 15, 2008, 12:30:02 PM »
I have a wireless controller and installed the plug in
also installed  Xbox360_32Eng.exe
The plugin config screen pulls up and is checked green
but in the configuration screen where is asks what kind of controller
or none.
that box is unaccessible
and nothing works.
I get no error messages.
? does anyone know what I need to do to get this working?

General Mach Discussion / Lazy cam problems
« on: September 10, 2008, 01:55:24 AM »
Does anyone know of a simple 2 or 3d cam program like Lazycam
but better?
I paid the money for Lazycam but it really sucks.
I could sit here for 2 hrs explaining the problems but it's a waste of time
Brian already told me that they weren't going to fix anything.

It's a shame because I really like Mach 3.
You would think they would have a little more pride in their product
like they do with Mach 3
Please let me know,

Hi all,
I'm looking for a simple old version of a cam program that I can generate G code with from a simple
wireframe, DXF file, that has X, Y, and Z moves.
Lazycam flattens out the dxf and generates just the X and Y
I need the Z also.
If anyone has any ideas please let me know.
I up for all suggestions.
If someone had an old version of mastercam or some other program
that they don't use please let me know.

General Mach Discussion / How to use a simple offset
« on: June 03, 2008, 08:44:30 PM »
Hi all,
I know it's simple to all of you but I've never had to use an offset in g code.
here's the code:

g0 x0 y0

g0 x-.074 y-3.518
g0 z-2.116
g1 x-2.35 z-2
g1 x-3.65
g1 x-5.89 z-2.116
g1 y-3.500
g1 x-3.65 z-2
g1 x-2.35
g1 x-.074 z-2.116

now what i need to do is just move .100 in Y axis and repeat 35 times

how is it done,
please clue me in,

General Mach Discussion / Simple Cam Program
« on: May 27, 2008, 09:33:19 PM »
Does anyone know of a very simple cam program other than lazy cam?
please let me know.

Hi there,
I can't seem to figure out what should be a simple thing.
I'm cutting a circular pocket 1.575" in diam.
I need to make it 1.580"; trying to use cutter comp. and can't get it to
Here is the g-code program.

G0 G49 G40  G17 G80 G50 G90
M6 T1(TOOL DIA.0.625)
G20 (Inch)
G00 G43 H1  Z0
X0 Y0
G01 Z0  F3
G3 Y0 X0.125 R0.625
Y0 X-0.125 R0.125
Y0 X0.25 R0.1875
Y0 X-0.25 R0.25
Y0 X0.375 R0.3125
Y0 X-0.375 R0.375
Y0 X0.4725 R0.4238
Y0 X-0.4725 R0.4725
X0.4725 Y0 R0.4725
Y0.2 X0.2725 R0.2
G00 Z0 x0 y0
M5 M9

Can anyone clue me in on how to accomplish this please.

General Mach Discussion / Ports and pins current state in Mach 3
« on: April 22, 2008, 10:44:07 PM »
? Can anyone tell me what I'm looking at in the diagnostics screen in Mach 3- ports and pins current state
I see 2 rows of 12 LED lights.
Obviously they represent the pins out of the printer cable.
But when I match it up to lets say a BOB how do you know which is which.
Is LED on the top left = to Pin #1 on my breakout board?

Please let me know,

General Mach Discussion / c10 breakout board rev 8
« on: April 18, 2008, 07:33:21 PM »
Does anyone have any feedback regarding this board, specifically revision #8?

cnc4pc    c10 breakout board rev 8


? J Code  What does the computer have to have installed for this to work?
I downloaded this on my office computer to check it out and it works fine.
I then downloaded it to my computer by the machine, and nothing happens.
What needs to be installed for this to work?

Pages: 1 2 »