Messages

1

General Mach Discussion / Re: Output signal

« on: August 13, 2014, 11:01:05 PM »

Hello  Hood
Well is not enabled and i don't use it at  all,that is the weird part,one day all is good the next i get the active signal from the output 6 that is active.

2

General Mach Discussion / Output signal

« on: August 12, 2014, 11:27:45 PM »

Hello to All

Well I have a problem with my Output signal from output 6 is active but as far as i know nothing is mapped to it,try to restart the computer,also the program,but nothing worked.After that check all my connections to the different switches but all of them look good.
Any ideas?

Thanks
Marco.

3

MACH TOOL BOX / Re: Plasma/Router, Macro to travel the PART extents to test material fit.

« on: March 21, 2013, 10:30:59 AM »

Hello to all
Well try Your code and I have a little problem,looks like if there are a lots of arcs in the dxf,the code will give the error of "arc different from arc on line *********" and the extend will only work from this point ,making in essence a small box and not going the full distance of the part.The file for the test has being cut before with out any problems.
I'm using the latest version of Mach 3.43.067.
Any ideas ?
Best Regards
Rem

4

General Mach Discussion / Problem with DEV Version .062

« on: April 24, 2012, 10:04:36 AM »

Hello to all
Well I downloaded the last version .062 and try it and  i get a really weird thing,When loading the G-Code the generating path window open but stays open and no paths are generated,then Mach freezes,here is where i click on the RESET button and Mach started to generate the path and work for a while then I will get random e-stops during the cut.Using Win XP service pack 3 .
Any ideas how to fix this issue?
Thank you.
Marco.

5

MACH TOOL BOX / Re: Plasma, Consumables tracking

« on: June 24, 2010, 03:20:39 PM »

Hello to all

BR549 I will like to ask if this version of the macros will work with the latest version of Mach or do You need and older version to run it?
Thanks for Your help.
rem

6

General Mach Discussion / Re: Problem with dowload version 3.41

« on: May 04, 2008, 08:28:35 PM »

Hello Hood,
yes and got the error above.
Marco.

7

General Mach Discussion / Re: Problem with dowload version 3.41

« on: May 04, 2008, 08:27:30 PM »

Hello Hood,
the display is fix now,all of the boxes where unchecked,weird.
Now the only part left is the plug in

8

General Mach Discussion / Re: Problem with dowload version 3.41

« on: May 04, 2008, 08:24:32 PM »

Hello Hood,
here is a picture of the error for the plug in
Marco.

9

General Mach Discussion / Re: Problem with dowload version 3.41

« on: May 04, 2008, 07:41:51 PM »

Hello Hood,
I try that and did not fix the problem.
Thank You for the help,Marco.

10

General Mach Discussion / Re: Site Redesign

« on: May 04, 2008, 06:55:20 PM »

Hello Scott,
Thank You for the help,Marco.