Messages

1

General Mach Discussion / Re: Adventures in MAXNC + MachIII accuracy/alignment

« on: November 11, 2021, 08:03:29 PM »

Maxnc has no alignment other than screw clearance holes which is minimal adjustment at best...my maxnc is pretty good...its only .001 off end to end x and y axis...using indicator....backlash is about .003 x y and 0 on z

2

Others / Re: Maxnc Cl15 spindle motor settings

« on: November 11, 2021, 07:58:34 PM »

Do u get ur spindle work max15....i have max15 but spindle only 1 speed.when turn on in mach3...its the minimum pwm speed setup in mach3.....mach3 no control speed when click up or down speed

3

General Mach Discussion / MAXNC T2 cnc lathe and mach3?

« on: November 06, 2021, 11:50:34 AM »

hi

has anyone gotten maxnc T2 lathe to work with mach3?

not much info about this at all

4

General Mach Discussion / Mach3Turn interface messed up not usable?

« on: August 16, 2021, 09:05:22 PM »

hi

my mach3mill interface is fine but why is mach3turn all messed up..missing a lot of critical buttons etc see pic

its not usable