1
General Mach Discussion / Re: NEWBIE- HELP PLEASE! WORK PIECE NOT SHOWING IN CORRECT POSITION
« on: February 10, 2021, 01:49:49 PM »
Thank you for the visual. I am absolutely in the reverse of that (I am in the bottom left corner instead of the top right as shown).
So it appears as though I have 2 issues going on:
1.) My machine is homed incorrectly (due to where I have my home switches placed on the mill)
2.) My x & y axis are not moving in the correct directions (ie. I put Y1 into the MDI and my table moves to the rear instead of to the front)
This is definitely enlightening; as well as melting my brain. I can switch my x & y motor direction, but that will not fix my homing problem. Suggestions? Thanks again to all, this can be very frustrating- and having help makes a huge difference!
So it appears as though I have 2 issues going on:
1.) My machine is homed incorrectly (due to where I have my home switches placed on the mill)
2.) My x & y axis are not moving in the correct directions (ie. I put Y1 into the MDI and my table moves to the rear instead of to the front)
This is definitely enlightening; as well as melting my brain. I can switch my x & y motor direction, but that will not fix my homing problem. Suggestions? Thanks again to all, this can be very frustrating- and having help makes a huge difference!