Messages

1

General Mach Discussion / Re: Radius to end of arc differs from start

« on: November 19, 2020, 01:11:12 PM »

Does anyone know how I can fix the problem  in Mach 3  ?? 

2

General Mach Discussion / Re: Radius to end of arc differs from start

« on: November 18, 2020, 01:06:18 PM »

Try this and see if you get the same as shown here:-

Sent your balltap Program to mach3 this is what it throws up

3

General Mach Discussion / Re: Radius to end of arc differs from start

« on: November 18, 2020, 12:08:28 PM »

Hi thanks for reply’s 
 I am working in radius ...
 I have read lazy cam manual  but still having issues ,,,,
 I will try that in Mach and see if I get same results  cheers   

4

General Mach Discussion / Re: Radius to end of arc differs from start

« on: November 17, 2020, 02:11:02 PM »

 the  dxf file  and the g code generated

5

General Mach Discussion / Re: Radius to end of arc differs from start

« on: November 17, 2020, 03:45:11 AM »

I have changed the ij settings in Mach 3 In config and saved changes   I have tried  both settings absolute and inc   And still get same result  a circle in the screen  ??

6

General Mach Discussion / Radius to end of arc differs from start

« on: November 16, 2020, 03:26:22 PM »

Hi all.
Im   New to cnc. Not been learning for very long. Hit a brick wall. Looked on youtube internet. With no joy how to solve the problem  im drawing a simple arc. In autocad. Saving the file as dxf  then im sending the file to lazy cam i clean it scale it generate the gcode.  I then load code in mach 3 turn mode. and in the screen. It just shows circle. Ive tried it with a diamond shape with a radius   Ive gone to general config and tried changing  ij settings. To absulte and inc.  etc. And same in lazy cam.  And still same shows on screen. What am i doing wrong. Can anyone help.