Messages

1

General Mach Discussion / Re: Z-axis changing during job & depth is increasing

« on: July 17, 2021, 01:11:13 PM »

Wrong job

2

General Mach Discussion / Re: Z-axis changing during job & depth is increasing

« on: July 17, 2021, 10:41:22 AM »

This is my drawing and setting of milling program.

3

General Mach Discussion / Re: Z-axis changing during job & depth is increasing

« on: July 17, 2021, 10:37:40 AM »

This is my drawing and setting of milling program.

4

General Mach Discussion / Re: Z-axis changing during job & depth is increasing

« on: July 17, 2021, 05:52:57 AM »

In DRO all things are true , x,y,z coordination are corresponds with real measurements.

Drawing file is correct too , there is no problem in drawing.

But Angels and Depth changing during job, I'll attach the done job picture.

5

General Mach Discussion / Z-axis changing during job & depth is increasing

« on: July 17, 2021, 04:35:24 AM »

Hello

I have a wood CNC. While I wanna cut a borderline or when I wanna make a 2d model with V-Craving in artcam , the Z axis increasing over time and depth of job is deeper than programmed. For example I set depth on 4mm , in the end depth was increased slowly and reached to 7.734mm.

I don't know where is problem and why it should be work like that. I tried different ways in artcam and changed the model but it's still do wrong job .

Thanks for your guidance 🙏

6

General Mach Discussion / X-axis Shifting during job

« on: December 29, 2020, 06:31:52 AM »

hello friends, I have a problem with mach3 home coordinates.

X-axis Shifting during job, and when program finished the X axis shifted to +X about 1-1.5 inches.

I have uploaded designed file and finished job.

how can I fix this problem?
anyone can help me ??