Hello Guest it is March 28, 2024, 09:10:59 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - voyager1972

Pages: 1 2 »
1
Mach Screens / Re: chinese cnc probing macros?
« on: April 25, 2019, 05:12:10 PM »
i will leave the screensets for a while,,,,,,,with my normal setup i have added the big tex m6 strart macro,,,,at least now i have the spindle move to the fixed plate location where i can change the tool and use the auto toll zero function,,,then continue with the cut. when i get more time i will sort a new controller,,, has anyone tried the " AXBB-E ethernet motion controller and breakout board combined controller " from the company behind of uccnc .

2
Mach Screens / Re: chinese cnc probing macros?
« on: April 23, 2019, 11:47:22 AM »
i will have a tinker later and let you know,,,,hopefully the motion controller update cures the issues,,,,,your 2010 screenset is a superb peice of work,,,and would help me alot with Machining times

3
Mach Screens / Re: chinese cnc probing macros?
« on: April 23, 2019, 11:00:33 AM »
hi ger21,,,,,i will copy the updated plugin to the plugins folder and see if the update helps,,, i have copied the text from the changelog and placed in my last post i made

4
Mach Screens / Re: chinese cnc probing macros?
« on: April 23, 2019, 10:58:17 AM »
i have just found the update for my exact motion card which is the  MKX-IV the last update has this info in the release note for that update, it goes as follows
 "
1.Set the probe user dro 2000,2001,2002 to replace the variable 2000,2001,2002.
so user could getuserdro(2000) to replace the GetVar(2000) when probing.
2. auto update acceleration to card when jogging
3. support slave axis seperate home
V2.39.8 2016.9.12
1.optimize the break resume function. "

do i have to do anything other than copy the  NcUsbPod.dll file into the plugins folder ??

5
Mach Screens / Re: chinese cnc probing macros?
« on: April 23, 2019, 10:02:39 AM »
thanks reuelt for your reply,,,i have downloaded the latest update for my card and will transfer it to the plugins folder of mach3,,,,regarding the replacement of "GetVar(2002) with getoemdro(802),
GetVar(2001) with getoemdro(801),GetVar(2000) with getoemdro(800)" .,,,,,,do i need to do this in certain macro files or all of them ??

6
G-Code, CAD, and CAM discussions / Re: Simple M6 Manual Tool Change
« on: April 23, 2019, 05:53:10 AM »
is there a macro available to get the "tool change location" option in mach3 to function,,,and goto x,y,z bed loaction when a tool change is requested .

7
Mach Screens / Re: chinese cnc probing macros?
« on: April 20, 2019, 05:32:02 AM »
I have been planning on upgrading  to uccnc ...so i will probably go down that road,,,,,thanks again ger21.....

8
Mach Screens / Re: chinese cnc probing macros?
« on: April 19, 2019, 05:02:14 PM »
i have installed the chinese macros,,,,seems to be running better although there was  a few glitches,,,,a few times after the fixed plate touch off ,the spindle did not retract ,just stayed in the fixed plate location....i will load some gcode tomorrow and try a test cut and see how it goes.

9
Mach Screens / Re: chinese cnc probing macros?
« on: April 16, 2019, 05:12:29 PM »
i have tried the chinese macros,,,still the issue remains,,,,,i will remove the fixed tool probe completely,,and try the toolchange using the moveable probe which came on the machine just to rule out interferance..

10
Mach Screens / Re: chinese cnc probing macros?
« on: April 14, 2019, 05:37:01 PM »
ill download and try those ,,ill let you know how i get on,,,,,,,,thanks

Pages: 1 2 »