Hello Guest it is March 28, 2024, 02:07:37 PM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - klypso

Pages: 1
1
General Mach Discussion / Re: Device error triggered appears randomly
« on: April 24, 2023, 05:56:27 PM »
You can also try another version of the ncusbpod.dll, it could help, otherwise try another version of mach3, some have bugs, good luck ..

2
General Mach Discussion / Re: Device error triggered appears randomly
« on: April 20, 2023, 11:41:52 AM »
IDK if this will help you but for my problem i used a different AC outlet for every components, 1 for the computer, 1 for the spindle, to minimize interference, also used a pci usb and another USB cable

3
General Mach Discussion / Device error triggered appears randomly
« on: July 30, 2021, 07:38:27 PM »
Hi everyone,

Device error triggered appears randomly when i'm machining and it stop the machine, it can appears 10 min after i start machining or after 2 or 3 hours

I changed my mach3 version from the 3.043.066 the the 3.043.062 and still have this problem, i'm using a dedicated computer with windows xp and nothing else than mach3 on it, not even internet.

Here is a video of the problem, you can see that the spindle is still turning very slowly, so maybe there is a data leak ? I'll try to change the usb cable on monday but mine is a good quality one so i don't expect much results

https://1drv.ms/v/s!AhY1EpZq7TgH2i4KTnj0u6dI_iKO?e=fcopWt

Any ideas are welcome ! i'm totally lost at this moment and i'll be happy to finish a project that requires 6 hours of machining ... :(

Thanks

4
General Mach Discussion / Spindle unstable under 11000 spin/min
« on: December 02, 2020, 10:40:14 PM »
Hi,

I want to use my cnc at 3000 min r/s but when i put a low value (under 11000) the spindle starts slowly and then decrease slowly, here is a video that is more clear ..

Do you have any idea of what to do ?

Thanks

https://youtu.be/7LYaPbsHGRQ

Pages: 1