Messages

1

PoKeys / Re: Pokeys57CNC Motor Not move

« on: June 02, 2022, 02:52:13 PM »

When testing homing & limits everything works great. When I install any test program the x axis motor moves about an inch and stops . I have tried this independantly for the x-axis, the y-axis as well as the z-axis and all stepper motors did the same thing. moved about an inch. Any ideas?

2

PoKeys / Mach3 & pokeys 57 cnc in setup for homing & limits is good. new test program NIL

« on: June 02, 2022, 02:31:58 PM »

When checking homing and limits everything works as required. When inserting a test program eg: roadrunner nothing happens or x axis moves aprox. 1-2inches and stops movement. Any idea