Messages

1

G-Code, CAD, and CAM discussions / Re: Mach2 Turm with Fusion 360

« on: January 02, 2020, 01:17:44 AM »

Found it, all is good

2

General Mach Discussion / Cannot get offsets to work in mach3

« on: December 29, 2019, 02:49:17 AM »

what is the trick to get offsets to work in mach3?

I have a hobby machine and change the tools by hand, I have offsets in the offset file, and when I do a t#M6 the display shows that the tool# and offset number is active, but the machine does not taking the offset change.  Am I missing a setting or sometning?

3

G-Code, CAD, and CAM discussions / Mach2 Turm with Fusion 360

« on: December 27, 2019, 05:53:22 PM »

Is there a Fusion 360 Processor that works with Mach3 turn?

4

General Mach Discussion / Re: cannot get mach3 turn to home

« on: March 15, 2017, 12:12:41 AM »

Nevermind.  seem to have gotten it fixed one of those things were I don't really know what I did.

5

General Mach Discussion / cannot get mach3 turn to home

« on: March 14, 2017, 10:10:03 PM »

I have just added homing switches to my lathe, cannot get the lathe to home.  I have looked at everything I can think of, but nothing seems to work.   If I load the mach3 as a milling program and press the home all button  starts to home. 

6

G-Code, CAD, and CAM discussions / How do you call a tool offset in mach3 turn?

« on: March 13, 2017, 10:58:43 PM »

I have not been successful in getting a tool offset in Mach 3 turn.     I see all sorts of talk about macros, but so far no examples that I can follow.   This is getting frustrating