Messages

1

Mach4 General Discussion / Re: Cannot set Machine coordinates G54 to 0.00 in the offset tab!!

« on: May 08, 2017, 09:16:21 PM »

Thank you for all the response
I contacted mach4 support, i was trying to reset offsets under the offsets tab, not under view  I totaly missed that !!!!
working great now
Thank you
Mike

2

Mach4 General Discussion / Re: Cannot set Machine coordinates G54 to 0.00 in the offset tab!!

« on: May 02, 2017, 08:28:39 AM »

Thank you
Not sure my reply went through
Under the Home offsets it is 0
I an at a lost !!
Mike

3

Mach4 General Discussion / Re: Cannot set Machine coordinates G54 to 0.00 in the offset tab!!

« on: May 01, 2017, 07:37:59 AM »

Thank you for a responce
i looked the Machine diagnostics it is not active .
 All of the setting on the fixture table tab are 0.00 but the G54 line. Program will allow me to set line G54 to 0, but will not stay.
I feel it is a setting i am missing. i am new to cnc and mach 4  I built a 6x10, 4 axes machine with nena 34s . spindle 4kw water cooled
 machine works great.  but this!!  The Machine thinks its almost 1/2"  down in the material , i could tell the machine  a thicker material, but i would perfer to fix the problem.
My drawings are in autocad 2014LT, cambam for cam, pmdx 424 breakout board, any help would be great
Thank you
Mike

4

Mach4 General Discussion / Cannot set Machine coordinates G54 to 0.00 in the offset tab!!

« on: April 30, 2017, 06:01:22 PM »

Under the fixture Tab in the fixture table, G54 is defaulting with a negative 0.5254. I have tried every combination and cannot get it to stay to 0. This is causing any project where I need to cut material 3/4" in the material, the machine already thinks it's a 1/2" down into the material. If anyone can explain to me to get G54 to stay at 0, I'd appreciate your help.

Thank you,
Mike

5

Mach4 General Discussion / Re: How to Add the A axes to mach4 screen

« on: March 06, 2017, 09:01:40 AM »

Thank you
It fixed my screen  now i can work getting my steps right.
Mike

6

Mach4 General Discussion / Re: How to Add the A axes to mach4 screen

« on: March 05, 2017, 07:40:04 AM »

Thank you for the response
I have a profile i am using now. does this meen i have to reset all of my settings  in the new profile?? or is there a way to copy the information
to the new profile with the 4th axes.
Thnk you
Mike

7

Mach4 General Discussion / How to Add the A axes to mach4 screen

« on: March 04, 2017, 10:50:27 PM »

I have Y,X,Z, and now adding my A axes could sombody explain  how to add A axes to  the mach4 screen  DRo
Thank you
Mike