Messages

1

PoKeys / Re: Setting error inputs

« on: October 06, 2019, 03:26:02 AM »

<a target='_blank' href='https://imgbb.com/'>free image hosting[/url]

2

PoKeys / Re: Setting error inputs

« on: October 06, 2019, 03:20:23 AM »

that's what i did

3

PoKeys / Re: Setting error inputs

« on: March 20, 2018, 11:42:23 AM »

Hi All,

OK, it's now resolved.
I have defined an OEM 1003 (stop) button, now I stop all if I have an error on an engine.
I use Closed Loop  Hybrid Servo Step Driver.

4

PoKeys / Setting error inputs

« on: March 17, 2018, 11:46:41 AM »

How do I set that driver error to stop all motors.
I use Mach3 and Pokeys57CNC.

5

PoKeys / Re: Soft limits enable Auto limit override

« on: July 19, 2016, 11:59:30 AM »

Ok working properly, we upgrade the firmware.

6

PoKeys / Soft limits enable Auto limit override

« on: July 18, 2016, 03:02:48 PM »

Hello,

I use PoKeys57CNC with 4 axis and a switch for each axis.
When the limit is triggered and I press the reset button,
I cannot move the motors (like in picture 1).


If I check shared with limit+, then Auto limit OverRide is activated and I can then move the motors to get out of the limit zone (picture 2).

I cannot save this. When I restart Mach3 I have to repeat those steps to check shared with limit+. Auto limit OverRide is activated in Mach3.
What should  I do?

Thanks!