Messages

1

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 21, 2016, 04:50:51 AM »

Thank you very much Ger. Absolutely wonderfull.
Everything worked perfectly. I am very happy, the machine also has worked very fine.
We have done a test resin. Now we will begin a definitive work on steel.
Many thank you very much for your plugin and attention you have given me.

I recommend it to all users mach3 if you want a friendly interface and the best settings "auto tool zero" buy all the: 2010 Screenset.

A money very well spent.

2

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 20, 2016, 12:51:01 PM »

Yes, this happens using the new macros that you sent me.
Everything worked fine. The message worried me but until the change of the second tool everything was ok.

The only problem has been that. When I put the second tool spindle is operated and down directly to continue the work. The tool does not measure the milling cutter

3

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 20, 2016, 09:54:54 AM »

Hi. Good afternoon Ger. First, thank you for all your help.
I am very happy because I can measure correctly, I think.
You can not imagine how much you've helped me.

I have just one last question. A while ago, I tried a file for the first time.
The measurement makes it right, but when beginning work says: "In Scripter Compile error. M6End.m1s"
But although the computer warn of this error the machine has successfully begun to do the job. But....
Changing the tool: after I change. The machine has not measured the No. 2 tool, the machine has continued to work directly without measuring.

The work done so far has been perfect. I have only that "little" problem.

Sorry, today I just wanted to thank you and good news. I wish my problem is small.

A big hello !!

4

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 15, 2016, 07:55:26 AM »

Thank you very much, then I will wait to try them

5

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 15, 2016, 07:32:34 AM »

A motion controller usb:  mach3 usb motion card (xhc)


This:
http://g02.a.alicdn.com/kf/HTB1uFM7KF*********XcEXpXXq6xXF*********q/XHC-MK4-font-b-CNC-b-font-Mach3-font-b-USB-b-font-4-Axis-Motion.jpg



Ok, I will download this version
thanks, thanks, thanks !!!

6

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 15, 2016, 07:12:15 AM »

Thank you very much, I've tried the update and I've seen some options that did not exist in the old version (Control brain ...)
Now I can put the plane clearance, lol just install it right now.
But for now I have a problem that I had, when I touch auto tool zero and the light goes on "probe", then Z axis rise to to up but don't stop in the right place.
The Z axis is not stopped all the way up until it touches the limits
Thank you very much again. I will continue investigating until everything is ok.

7

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 15, 2016, 05:25:10 AM »

Ouch, I thought it might be. I will update the program. Thank you very much; I was already a little crazy with all this. I hope everything works properly updated. Today in the morning I'll try.
Thanks again Ger21

8

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 14, 2016, 10:00:22 AM »

Sorry, but my English is also very very basic. Yes, I have used the original mach3; and I think more or less I understand the program.
If I hit the enter key, but even if the strike remains at zero, the numerical value is not fixed. The same happens with me "Manual spindle control" or "machine coordenates"; not that I want to activate the engine; It is that I can not activate these boxes. Do not know if maybe it is problem of my version of Mach3, but I thought it could be a problem for some unknown value that had put so erroneous.
Sorry for my English, I try to help from google, hehe.


Another question, do you know our method to measure? In WINPC NC it is almost automatic do this, but here it seems very complex.

Thank you so much Ger 21

9

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 14, 2016, 07:01:52 AM »

Sorry, another question.
I forgot to say how to measure tools in our projects:

We do not measure on the work material, because this material we will roughed. We always have the measuring on the desk, at a fixed height. In each tool change we go out measure and machine recalculates the distance from the tool to touch, to continue to make a fine roughing on the workpiece.

Do you know the correct way to measure mach3 this mode?
Thank you very much again

10

Finished Screens / Re: Mach3 2010 Screenset - Now available

« on: April 14, 2016, 06:54:08 AM »

First, greetings to all. Ger 21, I'm sorry if you wrote yesterday impatience, but I'm Spanish and do not really understand everything that gets on the web. In fact, I'm translating all this and do not know whether you will understand me well.

I have been working for long with WinPC NC. Now in my factory I bought a new machine with Mach3 and Mach3 XHC usb card. For me it was frustrating to see how different and how difficult it seems to me mach3 respect to another program; but since I am very stubborn I'm getting progress gradually.

I've already got the machine works; but my biggest problem is to configure the meter tool.

I bought 2010 Screenset because I read it was much better for macros and meter, but I still have not gotten measure Screenset 2010.

I appears on a screen "clearance plane must> 0- Please reset"
But I can not change zero "clearance plane", I can not activate "Manual spindle control" or "machine coordenates".
When "use safe Z" I get a code that also do not understand how to activate.

Sorry, but although I like the interface 2010 Screenset not understand some things.

Could you help me somehow? Is there any manual settings? And if it is not too much to ask ... is not there something in Spanish?
(Ger, maybe it would be a great way to open your market   )


Thank you all, and to Ger21.

Thankfully I hope your answers