Guest
Show Posts
1
Mach4 General Discussion / Re: New people welcome !! Come in here and introduce your self!
« on: February 14, 2016, 01:06:09 AM »
Hello Friends
In a last few years I started to learn about CNC programing and built some machines for our purposes.My English is bad,maybe I make some mistakes,wrong words,but I hope that You understad all.
My age is almost 50 so the new is not me,but of course here it is.
Generally I need the help from You regarding to work with mach 3.
I built some simple things like stepper motors with mach,but now I stopped a little bit.
In my new project there is a rollformer wich is needed to roll some profile and in a meantime to stop punch some holes,and go and stop the punch in other position
and finally cut the profile on lenght.The problem is that the main engine need to be drived with freq.inverter a 3x380 volts becouse of a big Nm needings.
We put the encoder on mach and its count in a settings screen but not be able to machining with.
There is some guy who help to me before,but he is also out of ideas how to manage this machine to work like I want.
Summarizing I need next.
X shaft:drive the 3xAC motor via frequency converter,and encoder
Y,Z,A,B shaft :to drive stepper motors for positioning 2 punchig heads
2 relays to give the signals to punching heads
1 relay to give the signal for cut to lenght
If someone help to me I really appreciate
Arpad from Hungary
In a last few years I started to learn about CNC programing and built some machines for our purposes.My English is bad,maybe I make some mistakes,wrong words,but I hope that You understad all.
My age is almost 50 so the new is not me,but of course here it is.
Generally I need the help from You regarding to work with mach 3.
I built some simple things like stepper motors with mach,but now I stopped a little bit.
In my new project there is a rollformer wich is needed to roll some profile and in a meantime to stop punch some holes,and go and stop the punch in other position
and finally cut the profile on lenght.The problem is that the main engine need to be drived with freq.inverter a 3x380 volts becouse of a big Nm needings.
We put the encoder on mach and its count in a settings screen but not be able to machining with.
There is some guy who help to me before,but he is also out of ideas how to manage this machine to work like I want.
Summarizing I need next.
X shaft:drive the 3xAC motor via frequency converter,and encoder
Y,Z,A,B shaft :to drive stepper motors for positioning 2 punchig heads
2 relays to give the signals to punching heads
1 relay to give the signal for cut to lenght
If someone help to me I really appreciate
Arpad from Hungary