Hello Guest it is March 28, 2024, 06:49:05 AM

Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - zarsss

Pages: 1 2 3 4 »
1
Thank you for kind answers. My last struggle is, can i call M code from the the script? Basically on a machine i`m doing, i need to stop and orientate spindle to 0 position, if the homing switch is hit. So in my case, call M5 and then M111.
Had a dummy crash last Friday, broke one of the toolholders. Thanks god, it is repairable.

2
Apparently i still have a problem with this. I don`t know, is this recently changed or what, but in the latest version of Mach4, there is no code under spindle cw and ccw buttons. All it is now, SpinCW() and SpinCCW(). When i tried to put a code in there, buttons just don`t work.

3
Thank you! Helps a lot.

4
Mach4 General Discussion / Two second output signal on M5 command.
« on: May 22, 2019, 06:11:12 AM »
Hi. I never needed to do anything special on Mach4, so i`m pretty dumb outside user interface. But now i need to have output1 to be activated for two seconds on M5 command. I have bare idea how to do that, but i cannot locate a script M5. Do i have to create a new one in profile folder? How big are my chances to ruin everything? I will be happy about any reply, thank you.

5
Mach4 General Discussion / Re: Mach4 bore probing.
« on: March 07, 2019, 10:56:43 AM »
Reply from cs-lab: 

 we know this issue and it will be solved soon.

There was some small change done in Mach4 and we have to adjust the plugin to it. Please wait.

6
Mach4 General Discussion / Re: Mach4 bore probing.
« on: December 20, 2018, 03:06:54 AM »
So what to do now? I have no clue about lua scripting, also i wonder, is that probing script the same across all of the versions? As i tried oldest version, newest version and random version of Mach4 from their ftp server. What is the solution?

7
Mach4 General Discussion / Re: Mach4 bore probing.
« on: December 19, 2018, 03:18:33 AM »
I see what you mean, but that iis probably caused by last probing steps being done in far right corner. Just crashing in side of the object being measured.

8
Mach4 General Discussion / Mach4 bore probing.
« on: December 18, 2018, 06:29:01 AM »
Hello. I made a big mistake, and looking for your help to solve it.
So we had this diy chc machine made about a year or so ago. Wiring and controller was done by myself and that was my third cnc conversion. I don`t have much knowledge about all this, but the machine was working fine all the time, until i did software updates without doing backups. I know, silly. Anyway, after updates when doing bore probing, it just not going it correctly. Attaching youtube links to the probing videos below, and also log file. Tried to speak to machsupport, they kept asking a lot of questions and only suggestion was to contact controller manufacturer as "error shows that is their error". The controllers manufacturer is not responding at all. Today i took another laptop with Mach4 and another controller to replace existing, it is doing absolutely same thing. Tried two different versions, all the same. But apparently probing script on both Mach4 versions are the same. So really i am out of ideas, how to get this machine back up and running. Any idea or suggestion is much appreciated. Thank you.

Hardware used:

windows 10 laptop x 2
CSMIO-M x2
Step/dir servos on all axis
simple touch probe

Software tested:

Mach4Hobby_Installer-4.2.0.3964.exe
Mach4Hobby_Installer-4.2.0.3485.exe
CSMIO plugin V3

Youtube links:

https://www.youtube.com/watch?v=cQ-ipo7ATvk
https://www.youtube.com/watch?v=vQQJ3MP6h6A

log file:
 
attached.


9
Mach4 General Discussion / Re: Mach4 Axis 0 Commanded While Disable Help
« on: November 30, 2018, 03:47:51 AM »
Fixed it by editing "Ref All Home" button in screen editor.

10
Mach4 General Discussion / Re: Mach4 Axis 0 Commanded While Disable Help
« on: November 30, 2018, 03:14:29 AM »
Hi. I also have " Mach4 Axis 3 Commanded While Disable" error on Go To Work Zero command. Is there a proper solution to this? Thank you.

Pages: 1 2 3 4 »