Messages

1

PoKeys / Re: Pokeys 56U as Pendant - MPG does not work

« on: September 03, 2015, 01:16:15 PM »

My version of Mach3 is R3.043.066, the Pokeys firmware is 4.1.17 and  the plugin version is 1.00.
I have chosen 'External IO with 4ch' in Mach3.
I manage to drive the relay from the pokeys software, it is relay 2 and 3.
Attached my config file.
Thank you.

2

PoKeys / Re: Pokeys 56U as Pendant - MPG does not work

« on: August 30, 2015, 09:36:24 AM »

Thank you for your answer,
I was actually a wiring problem.Now everything works.
I have another problem, I can not drive the relay to start the spindle.
I chose "Output 1" for relay 1 and "Output 2" for relay 2 in Pokeys configuration and then "Output 1" for M3 and "Output 2" for M4
But nothing happens when I try to control the spindle.
Thanx

3

PoKeys / Re: Pokeys 56U as Pendant - MPG does not work

« on: August 11, 2015, 01:02:44 PM »

Hello,
I have the same problem, I was unable to operate the MPG with my Pokeys57CNC.
I also have an LCD 2004, and impossible to make it work.
Does the Mach3 plugin works with the new Pokeys57CNC ?