Messages

1

CS-Lab / Re: CSIO/IP-A WARNING

« on: June 09, 2015, 06:07:26 AM »

well i had to send them a video of the problem , like they didnt believe me. I waited a week with no response from them. I called and they did set up a pickup date. I sent it out , that was three weeks ago . have not heard from them.i am about to go with a different controller.

2

CS-Lab / Re: CSIO/IP-A WARNING

« on: May 31, 2015, 06:58:47 AM »

I have sent the controller back to be checked out. the cable was wired almost like a crossover cable , but a couple wires were wrong.I checked it against the manual. that was no problem I just made one.I hope to hear back from them soon. I didnt get any lights from the controller , it has something wrong with it. I like how its set up ,so i hope to use it. but if they want me to pay more money i will go with a different controller.

3

CS-Lab / Re: CSIO/IP-A WARNING

« on: May 02, 2015, 09:01:51 PM »

I already made that check (its ok). when i turn the power on i get my solid yellow and flashing greed led for the ethernet, but nothing on Stat 0-3.I do like the way this controller is set up ,If i can get it to work.

4

CS-Lab / Re: CSIO/IP-A WARNING

« on: May 02, 2015, 08:01:15 PM »

I think im going to have to send the controller back to be ckecked. I did not realize there should be leds lit.

5

CS-Lab / Re: CSIO/IP-A WARNING

« on: May 02, 2015, 07:36:13 PM »

I have checked my power supply , its putting out 24v. all i get is the ethernet leds flashing.

6

CS-Lab / Re: CSIO/IP-A WARNING

« on: May 02, 2015, 04:50:28 PM »

I have tried every thing i can think of,and have not received a response from cs lab. i dont mean to sound so negative but after two weeks and I still cant even communicate with the controller.im not the best at computers ,but a simple network connection should be simple. when i connect 24 volts i dont even get any lights on the front I get etherrnet leds but thats it

7

CS-Lab / CSIO/IP-A WARNING

« on: May 02, 2015, 01:01:11 AM »

DO NOT BUY !!!!   I HAVE TRIED EVERY THING WITH MINE ,EVEN DIFFERENT COMPUTERS. ALL I CAN GET IS "CONECTION FAILED". I HAVE DONE EVERYTHING THE MANUAL SAYS TO DO. WHEN YOU TRY TO UPLOAD FIRMWARE IT SAYS "NO DEVICE FOUND".I EVEN HAD TO MAKE A NEW CROSS OVER CABLE ,THE ONE THEY SENT WAS WIRED WRONG(TWO WIRES CROSSED)THERE IS ALSO NO SUPPORT. DO NOT WASTE YOUR MONEY

8

CS-Lab / Re: csmio/ip-a communication problem

« on: April 29, 2015, 06:27:51 AM »

I have seen them flashing when i turned the power on. I just got off work ,later I think I will connect the computer to the net and down load the software. maybe there is a problem with the disk.

9

CS-Lab / Re: csmio/ip-a communication problem

« on: April 28, 2015, 04:19:40 PM »

I did ipconfig , says " media disconnected "

10

CS-Lab / Re: csmio/ip-a communication problem

« on: April 28, 2015, 08:19:23 AM »

Okay I did the ping test . ip 10.1.1.1  4 sent  0 received  4 lost
                                    ip  10.1.1.2  4 sent  4 recives 0 lost

this just tells me what i already know, there no cumunication