Messages

1

General Mach Discussion / Re: about the dual lathe spindle

« on: March 29, 2016, 10:24:43 AM »

but tell now we did not talk about the properties of the spindle motor
and how to calculate the cutting force for the machine

2

General Mach Discussion / Re: about the dual lathe spindle

« on: March 29, 2016, 10:19:11 AM »

i have a very crazy idea to activate /synchronize both spindles
and will drew it an solidworks  then upload the photos

3

General Mach Discussion / Re: about the dual lathe spindle

« on: March 27, 2016, 09:58:46 AM »

is it active in mach3 to use g14
and what is its syntax

and welcome to the masters mc and hood
we are hungry to learn

4

General Mach Discussion / Re: about the dual lathe spindle

« on: March 27, 2016, 05:48:00 AM »

hi \friends
a thought about the plc
and the good news is
i think he is using a hydrolic chuck
about the motion planing that could be made by analyzing the pick motion in practice
i think there must be some hand made software to calculate the pick position
i hope the member who made it to share his experiences

5

General Mach Discussion / Re: about the dual lathe spindle

« on: March 26, 2016, 06:19:46 AM »

thank you very much
it is a good help
but there is a member whom has made it
and here is his vedio
https://www.youtube.com/watch?v=xyirJ8cPgQo

6

General Mach Discussion / Re: about the dual lathe spindle

« on: March 25, 2016, 06:51:45 AM »

thank you mc for your contribution

7

General Mach Discussion / Re: about the dual lathe spindle

« on: March 24, 2016, 11:07:06 AM »

some thing else :
i reed about the g14 code which make mirroring to the g-code automatically do any body know about that and how to activate it in mach3
hope these links help:
https://diy.haascnc.com/g14g15-spindle-swap
http://www.cimindustry.com/article/metalworking/understanding-two-spindle-turning-technology

8

General Mach Discussion / Re: about the dual lathe spindle

« on: March 24, 2016, 10:50:19 AM »

hope the great masters to join and enrich this discussion

 

9

General Mach Discussion / about the dual lathe spindle

« on: March 24, 2016, 10:47:04 AM »

hi there
it took alot of time to get back
i'm very happy to join the masters again
here is the new subject
i'm working on a lathe machine and dream to make it with dual spindle
and here is the problems to discuss :
1- auto close chuck
2- the second spindle picking from the first one
3- the cad cam process to achieve that
i have some ideas to talk about bur let's begin from the beginning
by experiences

10

General Mach Discussion / Re: about : allow thc up/down control

« on: August 14, 2015, 06:58:55 AM »

thanks brother 
good explanation